Plug & Play Wiring Harness for Quick Fit installation of your driving lights. The supplied H3 (HB3) and H4 Adapters trigger your driving lights from your high beam without cutting or soldering any wiring. Simply unplug your HB3 or H4 connector at the back of your head lights bulb, plug in our adapter and you're done! Driving lights will only trigger from high beam, and the switch will act only as an isolator.
Contains everything you need to get your lights connected: ON/OFF Switch, 40A Relay, 40A Fuse, ribbed cable protectors, heat shrink wrapped relay.
Our new V2.0 has built in electronics that automatically detects whether your system is positive or negative switched , and will work right out of the box without any modification whatsoever. Toyota's, Ford Ranger, Mazda BT50 among many other popular 4x4 are notorious for being very difficult and costly to wire driving lights to high beam, our quick fit harness takes all the guess work out of it.
Connection Up to 740w Light Bar
2.0m from H4 or HB3 Adapter to Relay
14V/60A,24V/40A Switching Relay
Push Button ON/OFF Switch
2 Ways Deutsch Connections
Featuring a total 4.8 meters of wiring (full stretched out)
2.4m of cabling from Relay to Switch
2.0m of cabling from Driving Light connector to Relay
Total cable length 6.4m
12V DC 40A Rated Fuse Kit
UV Rated Insulation
H3 & H4 are the most common wiring connects found in most popular makes and models. In the event that your car does not use H4 or H3, this wiring harness can still be used to connect to high beam.
Wiring Kit Rating: 12V DC 40A
Relay Rating: 14V/60A, 24V/40A
Light Connector: Deutsch DT Waterproof
Max Load: 17a @12V
In the Box
1 x Plug & play Wiring Harness kit
1 x H4 High beam adaptor
1 x HB3 High beam adaptor
1 x 14V/60A Relay
1 x 24V/40A Relay
1 Year Warranty